RX8Guy
User
Fresh Boarder
| Posts: 1 |   |
|
20b - 2006/09/18 08:00
Nobody has been able to answer this question lets see if you guys can help me.
I rebuilt my first 20B. Have done lots of 13B's so I thought it would be event free. But, now I understand that all the dowel pins were not all the same (unlike 13b's) So now the engine is assembled and I have no idea where I installed the dowel pins. they apparently fit wherever I installed them. Is this something I need to worry about? What is the difference? It must be a very small difference since I didnt notice it. But I didnt pull out any mic's and check them.
Thanks is advance
RX8Guy
|
